Technical description of the men's jacket (according to the sketch) 1. purpose Men's jacket for workers and employees of industrial enterprises, for use as an upper part of a suit indoors and outdoors in the offseason. The model is designed to be worn over a shirt or light knit. 2. General view and cut • Straight silhouette jacket, up to hip length. • Central clasp on the bar along the line of the middle of the front. • Back with vertical middle seam. • The suction sleeve is long, with a slight narrowing to the bottom. • Shirt-type pull-back collar, with stand. 1. front structural elements • The upper part of the shelves is made of contrasting fabric (red yoke across the entire width of the front). • In the central part of the front there is a button fastener. • At chest level - two rectangular false pockets with valves; pockets are arranged symmetrically relative to line of front center. There is a pencil compartment in the left pocket. • At the bottom of the shelves - vertical inserts of contrasting color (red bars), trimmed with seams from the main fabric. These bars are the entrance to the side pockets. • The bottom of the product is decorated with a supply belt in a circle. 1. structural elements of the back • The back consists of a main part with a straight yoke along the shoulder line; the yoke is red across the width of the back. • Under the yoke - horizontal finishing detail - a strip of reflective fabric, around the circumference of the jacket. • Middle back seam from yoke to bottom, easy fit possible for freedom of movement. 1. sleeves • Long wadded sleeves, single seam. • In the upper part of the sleeve, closer to the elbow line, there is a horizontal finishing element - a strip of reflective fabric passing along the circumference of the sleeve. • Sleeve bottom with inlet collar; on the cuff it is possible to make a fastener for one button to adjust the volume. 1. finishing and safety elements • Along the chest line (along the perimeter of the jacket) there is a horizontal light strip that acts as a finishing and retroreflective element. • A similar light stripe is located on the right sleeve at elbow level. • All main joints and structural lines are lined up. 1. materials (recommended) • Basic fabric: mixed (cotton/polyester) wear resistant, suitable for workwear. • Contrasting details (red yokes and inserts): from the same fabric, but in a different color. • Light stripes: from retroreflective fabric/tape or finishing fabric of contrasting color. 1. dimension series • The jacket is designed in a typical male size range (for example, height 170-188, chest girth according to the enterprise standard). Specific parameters are specified in the dimension table of the construction documentation.